NSK 7007 Bearing
Deep Groove Radial Ball Bearings
Radial deep groove bearings are made with very high levels of precision and used in applications where rotational performance and low torque is necessary, but load is a secondary issue. Miniature, Deep-groove bearings however do have higher load ratings for their size than shallow-groove ball bearings, but are also less tolerant of misalignment. Ceramic hybrid ball bearings use ceramic balls.Radial Ball Bearings Grooved raceways on inner and outer rings sustain moderate axial loads in both directions in addition to radial loads. Balls separated by steel cages permit high-speed operation. Constructed from high-quality SAE-52100 chromium bearing steel.
Single-row deep-groove ball bearings are suitable for use at both low and high speeds. They absorb radial and axial forces. They cannot be dismantled. (Electric motors, fans, encoders, flowmeters, etc.) Single row deep-groove ball bearings consist of. An inner and an outer ring; A set of balls with cage and (usually) a layer of load-bearing lubricant.
- 170mm x 260mm x 28mm SKF 16034/c3-skf Deep Groove Radial Ball Bearings
- 36 mm
- 190mm x 290mm x 31mm SKF 16038/c3-skf Deep Groove Radial Ball Bearings
- 4,900 rpm
- 190mm x 290mm x 31mm SKF 16038-skf Deep Groove Radial Ball Bearings
- Single Lip
- 200mm x 310mm x 34mm SKF 16040/c3-skf Deep Groove Radial Ball Bearings
- 23,000 rpm
- 10.3 kN